Chuck and the folks at CRD wrapped my Maserati. Their work and attention to detail is impeccable. If you are in the market for an auto or boat wrap, CRD is your answer. #CustomerForLife
★ ELECTRICAL FLEET WRAPS · FLORIDA
Be the Electrician They Already Trust — Before You Knock.
Nobody wants a stranger touching their wiring. We wrap Palm Beach County electrical fleets so your van shows up looking licensed, insured, and established — on every service call, every job site, and every driveway. 3M-certified installs that last 5–7 years in the Florida sun.
★★★★★ 5.0 on Google
✓ 3M Certified Installers
✓ Avery Dennison Partner
✓ 5–7 Year Warranty
✓ 3M Certified Installers
✓ Avery Dennison Partner
✓ 5–7 Year Warranty
Trusted by Electrical Contractors & Municipalities Across Palm Beach County
Generators and Panel Upgrades Go to the Name People Know.
Electrical work runs on trust and recall. When a homeowner finally books that panel upgrade, whole-home generator, or EV charger, they call the electrician whose clean, branded van they’ve seen around the neighborhood for months — not the unmarked truck they can’t quite place.
Why Electrical Contractors Choose CRD Wraps
Four Reasons Electricians Keep Re-Wrapping With Us
From a single service van to a full electrical fleet, here’s what a wrap actually does for an electrical contracting business in Palm Beach County.
What We Wrap
From One Van to a 50-Truck Fleet
In-house design, print, and installation — all under one roof in Royal Palm Beach.
Full Vehicle Wrap
Maximum impact. Full coverage turns a service van into a moving billboard customers spot from across the parking lot.
View Examples
Partial Wrap
Mid-budget option that hits the eye-level panels and rear doors drivers actually read at a red light.
View Examples
Lettering & Logo Decals
Entry-level branding, fast turnaround. Get your name, phone, and license number on every van in days.
View Examples
Equipment Trailer Wraps
Wrap the generator or material trailer too — extra rolling real estate at a fraction of a full van.
View Examples
Multi-Truck Fleet Rollout
Phased installs so your vans stay on calls and job sites. 1–2 at a time, with weekend slots available.
View Examples
Wrap Refresh & Removal
Update your look or strip a wrap clean before resale. Factory paint stays perfect underneath.
View Examples
How It Works
From “Hello” to “Wrapped” in 4 Steps
Most projects go from first call to driveaway in 2–4 weeks.
Free Consultation
A quick 15-minute call. We learn your fleet, your brand, and what you want each truck to say.
Custom Design
Our in-house designers mock the wrap on your actual vehicle make and model — no templates.
Print & Production
We print on certified 3M / Avery Dennison vinyl and UV-laminate every panel for the Florida sun.
Pro Installation
3M-certified installers wrap each truck in our Royal Palm Beach shop. Most vans finish in a day.
Free Mockup · No Commitment
Ready to Make Your Electrical Fleet Impossible to Ignore?
We’ll mock up a wrap on your actual vehicle and send you a fixed price within 24 hours.
Electrical Portfolio
Electrical Wraps That Turn Heads
A look at recent fleet, full, partial, and lettering projects we’ve done for electrical contractors across Palm Beach County.
★★★★★ 5.0 on Google
What they Say About CRD
Real reviews from fleet owners, service techs, and shop managers across South Florida.
Chuck does a great job and is extremely meticulous. His passion for his trade shows in the product he produces. I had him add lettering to my company trailer and his suggestions in size and scale produced great results.
Advanced Cycle Tuning
Another AMAZING wrap job for Christmas – Olivia’s custom wrapped long board. Thanks Charles Reis….YOU ROCK!!
West Palm Beach, FL
I have had so many compliments on the custom fins logo you made for Zack. I’ll have to post some pictures as soon as I take them. Thank you so much.market for a new decal I would highly recommend these folks! You won’t be disappointed.
Wellington, FL
CRD Wraps vs. The Other Guys
Why Electrical Contractors Choose CRD Over Cheap Sign Shops
The wrap is only as good as the design, the film, and the install. Here’s where the difference shows up.
✓ CRD Wraps
- 3M-Certified installers — film won’t bubble or peel in the FL heat
- In-house designers who build electrical vans that read at a glance
- Free mockup on your actual van make and model
- License number sized to read from across the street
- Phased rollout — your vans stay on calls and job sites
- UV-laminated film rated 5–7 yrs, with locked files for matching panel swaps
- Local shop at 9150 Belvedere Rd, Royal Palm Beach
✕ Generic Sign Shop
- Off-the-shelf templates that look like every other van
- Untrained installers — bubbles, lifting, short lifespan
- No before/after mockup before you pay
- Cheap films that fade and crack in two years
- All-or-nothing rollout — your fleet sits idle
- No saved design files — replacement panels won’t match
- Out-of-state operations, slow to respond when issues arise
Questions Electrical Contractors Ask
Pricing, Downtime, Trust & Longevity
Quick answers to what electrical contractors ask before they call us.
How much does it cost to wrap an electrician’s service van?
Pricing depends on size, coverage, and design complexity. Lettering and decals start at a few hundred dollars; partial wraps fall in the mid-range; full van wraps run several thousand depending on the vehicle. For most electricians a single big-ticket job — a panel upgrade or generator — covers the wrap many times over. We send a custom quote within 24 hours once we know your fleet.
Will wrapping my vans take them off jobs for long?
No. Most single vans finish in a day, and for fleets we phase the work 1–2 vans at a time with weekend and evening slots — so your crews stay on calls and job sites while we work.
Do wraps actually win electrical work?
Yes — especially the high-ticket jobs. Panel upgrades, generators, and EV chargers go to the established name people recognize, and a wrapped van seen around town and parked on job sites is what builds that recognition for pennies per impression.
Is a full wrap worth it, or should I just do lettering?
Both work. Lettering puts your name, number, and license on the van fast and cheap; a full or partial wrap builds the professional, established look that wins trust and big-ticket jobs. We’ll recommend the right level for your budget and goals.
Will the wrap damage my van’s factory paint?
No — it protects the paint from UV, sand, salt, and minor scratches. Professionally removed, the factory finish underneath is usually in better shape than unwrapped panels, which protects your resale or trade-in value.
What if a panel gets scratched on a job site?
We keep your design files on hand, so a single damaged panel can be reprinted and replaced to match the rest of the van — no need to re-wrap the whole vehicle over one scrape.
How fast can you wrap a new van we just bought?
Most single-van installs go from design lock to driveaway in 5–10 business days. Rush slots are sometimes available — call (561) 315-1773 to discuss timing.
Meet CRD Wraps
A Family-Owned Shop That Treats Every Wrap Like It’s Ours.
Charles and Ashley Reis started CRD Wraps in 2012 with a simple idea: do the work the right way, and your name does the marketing for you. More than a decade later, we’re still family-owned, still installing in Royal Palm Beach, and still treating every fleet wrap like it’s our own truck on the road.
Charles leads design and install. Ashley runs print production and is an Avery Dennison professionally trained installer. We’re 3M Preferred and Avery Dennison Preferred — the credentials that matter when your fleet has to look right for 5–7 years in the Florida sun.
10+ yrs
In Business
300+
Businesses Served
40+
Vehicles / Month
100%
Google Review Score
Free Electrical Fleet Quote
Get Your Free Fleet Quote in 24 Hours
Tell us about your fleet and we’ll send a design mockup plus a fixed price within one business day. No commitment, no spam.